What scanner does GM use?

GM uses two main scanners for diagnostic purposes: the GM Tech 2 and the MDI 2 Diagnostic Tool. Both scanners offer advanced capabilities and are widely used by GM technicians.

 

The GM Tech 2 is the official factory scan tool used in all GM dealers since 1996. It provides comprehensive coverage for all makes and models of GM vehicles, including passenger cars, trucks, and vans. Unlike generic scanners that simply show and decode error codes, the Tech 2 can provide detailed information about the errors and even allows technicians to set brand/type-specific settings. It is a versatile tool that is highly regarded in the automotive industry.

There are four main reasons to choose the GM Tech 2 scanner. Firstly, it supports multiple languages, including English, Italian, French, Portuguese, German, Spanish, Korean, Japanese, Thai, and Chinese. This makes it accessible and user-friendly for technicians from different regions. Secondly, the Tech 2 can be updated via a 32MB software card, allowing technicians to stay up to date with the latest software. If there is a newer version available, a new card can be purchased to update the scanner. Thirdly, the Tech 2 is compatible with a wide range of car models, including GM, SAAB, Opel, Suzuki, Isuzu, and Holden vehicles. Lastly, it has a wide year coverage, being able to diagnose vehicles from 1992 to 2014. Additionally, with the help of the Tis2000 software, it can also perform programming for cars manufactured before 2007.

The MDI 2 Diagnostic Tool is another high-quality scanner used by GM. It offers advanced diagnostic capabilities and is known for its reliability. Some highlights of the MDI 2 scanner include its multi-language support, extensive year coverage, optional software package, support for new cars, and WIFI connectivity.

Similar to the Tech 2, the MDI 2 supports multiple languages, making it accessible to technicians from different regions. It has extensive year coverage, being able to diagnose cars from 1990 to 2024, making it compatible with both older and newer models. The MDI 2 scanner can be purchased with or without a pre-installed software package. If the package with software is chosen, the MDI 2 software will be installed on a 250G SATA interface laptop HDD. The HDD is compatible with laptops that have a SATA hard disk interface and were manufactured after 2008. The MDI 2 is specifically designed to support vehicles manufactured from 2010 to 2024. Additionally, it offers WIFI connectivity, allowing for convenient and wireless diagnostic operations.

In conclusion, GM uses the GM Tech 2 and MDI 2 scanners for diagnostic purposes. These scanners provide comprehensive coverage for GM vehicles, and each offers unique features and capabilities. By utilizing these advanced scanning tools, GM technicians can effectively diagnose and address any issues that arise in GM vehicles.

piwis 2 vs piwis 3 vs piwis 4

 
In the ever-evolving automotive industry, staying up-to-date with the latest technology is crucial. For Porsche owners and enthusiasts, the PIWIS diagnostic tool has become an indispensable resource for diagnosing, programming, and maintaining their vehicles. In this blog post, we delve into the various versions of PIWIS and their capabilities, highlighting how they have revolutionized the way Porsche cars are serviced.

PIWIS II: Unlocking the Potential of Porsche Diagnostics
As a professional tester for Porsche, the PIWIS II is renowned for its powerful diagnostic and offline programming capabilities. It provides full access to a wide range of Porsche models, allowing technicians to effectively diagnose and troubleshoot issues. With PIWIS II, cars up to and including the 2017 model year can be handled, ensuring thorough support for older Porsche vehicles.

PIWIS III: Embracing Innovation and Expanding Compatibility
The PIWIS III represents a significant advancement in Porsche diagnostics, offering support for a broader range of models, including the Panamera, Cayenne, Macan, 911, and the legendary 918 Spyder. Serving as the successor to the PIWIS II system, this cutting-edge tool covers all Porsche vehicles manufactured up to the present year. Its enhanced capabilities empower technicians to address complex issues and perform comprehensive maintenance tasks.

PIWIS IV: Shaping the Future of Porsche Diagnostics
While details regarding PIWIS IV's specific vehicle support may be limited, it is widely anticipated to continue and expand compatibility for all modern Porsche models. This advanced version of the diagnostic tool aims to focus on the newest and forthcoming Porsche releases, including electric vehicle models. By integrating the latest technological advancements, PIWIS IV ensures that technicians are equipped to address the unique challenges posed by the ever-evolving automotive landscape.

The Power of PIWIS: Simplifying Porsche Maintenance and Repairs
The PIWIS suite of diagnostic tools has revolutionized the way Porsche vehicles are serviced. By utilizing these state-of-the-art tools, technicians can efficiently diagnose problems, perform essential maintenance tasks, and even program new components. This not only saves time but also enhances the overall performance and reliability of Porsche cars.

Conclusion:
In the realm of Porsche diagnostics, the PIWIS series stands as the ultimate toolset for technicians and enthusiasts alike. From the powerful PIWIS II, which covers cars up to the 2017 model year, to the innovative PIWIS III, designed to handle the latest Porsche releases, and the future-ready PIWIS IV, these diagnostic tools continue to shape the way Porsche vehicles are serviced. By embracing the power of PIWIS, Porsche owners can ensure their cars receive the utmost care and attention, guaranteeing optimal performance and driving pleasure for years to come.

Xhorse Dolphin XP005 Error Code 29 Solution

 

Here share the solution to resolve Xhorse Dolphin XP005 Error Code 29.

Problem:

Use Dolphin XP005 to cut key, it can’t cut key normally. Try the height adjustment, the X-axis motor test and the Z-axis motor test, all fail and get the error code: 29. I also do a conductivity test, the cutter and clamp are fine, but the probe and clamp are showing always tests on.

Engineer replied:

The milling cutter shorted out, please follow the following post to check

Xhorse Dolphin XP005 probe and milling cutter abnormal conductivity detect method

After that, clean the iron filings inside.

Check the Cylinder Compression using TECHSTREAM (TIS) Software

 

Check the Cylinder Compression

INSPECT COMPRESSION
1). Manually using the pressure gauge (cylinder compression pressure).
* Remove Cylinder Head cover.
* Remove 4 Ignition Coil.
* Remove 4 Spark Plug (Busi).
* Remove connector Fuel Injector.

-Install compression gauge to the Spark Plug port.
-Place the throttle on fully open.
-START (cranking) the engine, and measure through the compression gauge.

* 1471 kPa (15.0 kgf/cm², 213 psi)
* Minimum pressure: 1079 kPa (11.0 kgf/cm², 156 psi)
* Differences between the cylinder: 98 kPa (1.0 kgf/cm², 14 psi or less)

-Use fully charged-battery, So the Engine Speed while START can reach 250 rpm or more.
-Inspect the another cylinder with the same way.

2). Using TECHSTREAM (TIS) Software.
#Check the Cylinder Compression
* Connecting MINI-VCI adapter to OBDII Diagnostic Port on your Car. Read More: Install MINI-VCI J2534 Driver untuk TECHSTREAM (Toyota TIS) Software
* Once connected, click the “Engine and ECT” on “System Selection Menu”.

* Click “Active Test” on the left side menu, and “Active Test Selection” displayed as Figure 1.3 below. Choose “Check the Cylinder Compression” from the “Active Test List”, then click “OK”.

On this “Active Test”, Fuel and Ignition all cylinders are cut, cranking occurs for approximately 10 seconds. Then, each cylinder measures the Engine rpm. If a cylinder’s Engine rpm is higher than the other, that cylinder’s compression pressure is compared to the other, and is determined whether it is low or not.

Operate with Ignition ON, Engine OFF, Shift Selector in P (AT) or Neutral (MT).
-Command: ON/ OFF.

This test requires the Engine to crank continuously for approximately 10 seconds. Push button ignition switches may require button to be held down for approximately 5 to 10 seconds to complete this test. Please connect a battery charger if insufficient battery voltage.*

* Change monitoring “Data List” to “Compression”, we need to monitoring the “Engine Speed of Cyl #1 – #4”. Read More: Monitoring Parameter Data List on Your Car (Real Time) using TECHSTREAM (TIS Software).
* Click on “<” to activate (ON), and “>” to deactivate (OFF).
* When the “Check the Cylinder Compression” ON, cranking/ START the Engine for approximately more than 10 seconds, and please monitoring the Engine Speed from each cylinder (Cyl #1 – #4).

iProg programmer do odometer programming for Honda MB91F061BS

 

This post show a feedback on iProg programmer do odometer programming for Honda MB91F061BS.

Notice:You need have scripts,otherwise you can not do it.

Preparations:

Newest iProg Pro Plus iProg+ v87 v84 v82 Free Download

 

Procedures:

Build connection by iProg programmer

Then run iProg software,then select “Honda MB91F061BS”

Click “Read EEPROM”,wait processing

Now enter a new value

Click “Write EEPROM”

Wait processing,when “Write EEPROM” ok in message box

The dashboard will restart

After dashboard light on,it will show a new value you input just now.

Caterpillar electronic technician

 

Caterpillar electronic technician 2022A (replaces CAT ET 2021C, 2021B, 2021A, 2020A, 2019C, 2019B) with Win Flash future is an updated version of the caterpillar dealer diagnostic software that can help technicians to diagnose existing and potential problems with their electronically controlled Caterpillar Engines and Machines.

Pls note: if you buy cat 2022A software, we will send the software by email, please download and install the software into your laptop.then send the Todesk id and password to us,we will activate it for you soon for free one time.

The Built-in Factory Password Generator: the CAT 2022A software include the 10 Bit factory passwords when you push the ctrl+f2 shortcut button,you can open the 10 bits of password generator.

Cat works with the Caterpillar Communication Adapters family.

CAT 2022A software can work with Windows 7 32 bit, Windows 7 64 bit, Windows 8/8.1 32 bit, Windows 8/8.1 64 bit, Windows 10 32 bit, Windows 10 64 bit

If you want to learn more, you can contact with us :sale@cnautotool.com or you can search on our store directly : https://www.cnautotool.com

Solve KT200 Delphi DCM6.2C OBD Car Not Start?

KT200 can read and write Delphi dcm 6.2c via OBD 100% but Jumpy doesn't start! Checksum automatic mode and calculate with Winols but car doesn't start! Id ecu ok. How to do？


Solution:

try to write ori file - car still won't start.

Sometimes you need to wait 15mins after write file.

Disconnect ECU, battery - nothing work.

disconnect battery for 5mins reconnect, Close car with remote, wait, open car, place ignition on 15 mins, then try to start.