Solve KT200 Delphi DCM6.2C OBD Car Not Start?

KT200 can read and write Delphi dcm 6.2c via OBD 100% but Jumpy doesn't start! Checksum automatic mode and calculate with Winols but car doesn't start! Id ecu ok. How to do？


Solution:

try to write ori file - car still won't start.

Sometimes you need to wait 15mins after write file.

Disconnect ECU, battery - nothing work.

disconnect battery for 5mins reconnect, Close car with remote, wait, open car, place ignition on 15 mins, then try to start.

Witech Micropod2 Program 2005 Chrysler 200 All Keys Lost

Confirmed! wiTech Micropod 2 is able to do online programming to Chrysler including ECU programming and key adding even when all keys are lost. Here you go.

 

Purpose: Micropod 2 clone programs new key fobik to Chrysler 200 when all keys are lost

Car: 2015 Chrysler 200 (The 2015 Chrysler 200, along with other Fiat-based models like the Jeep Renegade, Jeep Cherokee, and Ram Promaster, are all equipped with a rolling PIN Code.)

 

What you need:

Locksmith Identification Number (LSID through NASTF)

Proper keys to be programmed

PIN Code

Laptop

MicroPOD II good quality clone or the genuine

wiTECH diagnostic application

 

Before you begin the programming process, you should the Key Code (key cut code) and Authorized PIN (key programming).

 

VERY VERY VERY IMPORTANT:

    You must be online to program the key with Micropod 2 clone.
    You can pull the PIN Code with OBDSTAR F104 key tool.
    If you input the wrong code for 3 times, it locks the BCM and you cannot service the vehicle for 24 hours.
    The key is one-time programmable. Once married to the vehicle it is locked to the car forever. The key can be erased from the car and put back into the same car, but can’t be switched to another car.
    The placement of the key during initialization is important. It needs to be placed either behind the shifter or in the center console.

 

 

How to program fobik with wiTECH app:

 

Step 1:

Plug the MicroPOD II adapter into the OBD port and connect the USB cable from the device to your laptop. This wakes the BUS on the car.

 

Step 2:

Manually enter the VIN of the vehicle. This gives you access to the module list.  Select the RFH (Radio Frequency Hub) module. This is the module where the key is registered.

 

Step 3:

Next select “Miscellaneous Functions,” then “Program Ignition Fobiks.”  At this point, you are prompted to enter the VIN again, followed by the four-digit PIN Code.

 

Step 4:

After the four-digit pin is entered you are prompted to hit continue to “Program Ignition FOBIK.” Once you hit continue you must press the UNLOCK button on the FOBIK within 30 seconds (the FOBIK needs to be located near the center console during this procedure).

 

Step 5:

Programming of the Ignition FOBIK is now successful. The new key key is accepted into the car, and the ignition will now turn on and start the car. At this point, you also have the option to program a second key with wiTech application.

 

www.cnautotool.com

Solve CG FC200 E135 Device not activated

 

How to Solve CG FC200 E135 Device not activated?

Here shares the solution to resolve CG FC200 Error ‘E135: device not activated’.

 the solution:

    FC200 activation requires network connection.

Make sure the computer is connected to the internet with stable signal.

    Connect FC200, ECU and computer again.

Make sure the device connection is normal.

    Update the software

In FC200 software, first click ‘Check for updates’ to check if there is new version for update. If yes, click ‘Firmware upgrade’ to update.

 

 

www.cnautotool.com

How to use Cummins INSITE Software to connect to CUMMINS engine

There Share details of connecting Cummins engines with Cummins INSITE software

Proceed as follows:
Open “Cummins INSITE” via the shortcut on the desktop. Use the status bar to select connection options

Figure 1.2 – Status bar (Connection Options)

Click the dropdown box on the “Status bar” to view a list of all currently available connection options, or click “Add New” to create one, then click “Next”.

Figure 1.3 – ECM Connection Wizard

Use the “ECM Connection Type” page, and choose “Datalink Adapter” (Connect using a Datalink Adapter), then click “Next”.

Figure 1.4 – ECM Connection Type
Choose “Connection Settings”, select your “Datalink Adapter Vendor”, “Datalink Adapter”, and “Datalink Protocol”, then click “Next”.

Figure 1.5 – Datalink Adapter Vendor

Figure 1.6 – Datalink Adapter

Figure 1.7 – Datalink Protocol

Click “Connect to ECM”
-If you are connecting to a new ECM or an ECM without existing ECM passwords, select “None” in the Security Type: dropdown list.
-If you then want to define ECM security type passwords, select ECM Passwords on the Tools menu once connected to the ECM.

The “Work Order Wizard” is automatically displayed for you to create a work order for the selected connection, then click “OK”. NOTE: You can disable the Wizard from starting automatically by unchecking the Enable Work Order Mode checkbox in the Work Orders page of the Options window.

Figure 1.8 – New Work Order

Wait the “Work Order/Image Creation” until 100% of creating image.

Figure 1.9 – Work Order/Image Creation

For example, “Fault Codes” display on Cummins INSITE software.

Figure 2.1 – Fault Codes

Figure 2.2 – Fault Codes (Overview)

 

Looking forward to your consultation our website sale@cnautotool.com

How to pair the MaxiFlash with the IM608 Tablet?

 

 

 

 How to pair the MaxiFlash with the autel maxiim im608 auto key programmer?
1. Power on the tablet.
2. Insert the 16-pin vehicle data connector of the MaxiFlash to the vehicle data link connector (DLC).
3. Tap the VCI Manager application on the MaxiFlash Job Menu of the tablet.
4. Select BT from the connection mode list.
5. Tap the Scan button at the top right corner. Now the device starts searching for available pairing units.
6. The device name may display as MaxiFlash suffixed with a serial number. Select the appropriate device for pairing.
7. When paring is successfully done, the connection status displayed to the right of the device name is shown as Paired.
8. Once paired, the VCI button on the system Navigation bar at the Connection LED on the MaxiFlash illuminates solid blue. This signifies that the tablet is connected to the MaxiFlash, and is ready to perform vehicle diagnosis.
9. Tap the paired device again to unpair it.
10. Tap the Home button on the top left to return to the MaxiIM Job Menu

Porsche PIWIS 3 Notes

The Porsche PIWIS 3 (PST3) is the newest Diagnostic Tool in the market. It can read trouble code, clear trouble code, shows ECU information. It test live data, display actual values, and programs.


The Porsche PIWIS 3 (PST3) Tester III Diagnostic Tool :
1. Exclusive support for Porsche third generation diagnostic PIWIS 3
2. New DoIP Ethernet diagnostic technology
3. Luxury car diagnosis, ultra low threshold
4. Support Porsche Models after 1996.
Update method : Send SSD back or buy a new SSD

Power-on password ：123456

Notice:
1. The SSD cannot be copied.
2. Piwis 3 Software SSD can ONLY use as internal disk, NEVER use as external hard drive, otherwise it will be useless and damage the SSD.
We don't provide after sale service once the SSD used as external hard drive.
3. Laptop Specs Requirements: Lenovo laptop (1920*1080 resolution memory 4G I5CPU or above)
We standard package with laptop comes with Lenovo Yoga S1 i5 8G laptop is recommended.

4. This is hardware with software, if you need Piwis iii with laptop complete ready to use, please click: https://www.cnautotool.com/goods-6976-Porsche-Tester-III-Diagnostic-Tool-Piwis-3-Software-Installed-Laptop.html

5. Not support install printer on the hard disk yourself , its was protection , if you need install printer , please tell us in advance with your printer dirve , then we will install printer drive for you before the shipment  

Multi-Language: German, English, US English, French, Italian, Spanish, Japanese, Chinese, Russia, Portuguese, Nederlands

CnAutotool.com offer PIWIS Tester III Porsche PIWIS 3 Software, need know Piwis 3 Price just contact us
 

CAT ET Software - 2022A

  CAT ET Software - 2022A

 

If you are seeking a good device to identify the problems in a Cat device or engine, you may wish to take into consideration buying the CAT ET software. This program is an electronic communication system that interacts with the equipment's ECM. It assists you to fix engine concerns and also displays the hours of procedure. The software application is cost-free for download from the supplier's site and consists of detailed directions for usage. CAT ET Software is a digital diagnostic software program that assists technicians and Principal Engineers in repairing problems in online regulated Cat equipments and engines.


The program is simple to use and also accesses details from the electronic control components found on Cat engines. The software application includes useful tests as well as standing criteria, as well as data logs for both active and logged codes. The software program is specifically helpful for mechanics who service heavy equipment. Its recommended PC needs as well as interaction equipment are listed on the product's web site. You can acquire the software program at a Michigan dealer or online. The Caterpillar ET analysis device is a program that permits solution personnel to reprogram the ECMs as well as evaluate essential system information. This software uses an exclusive data link network to interact with the maker's ECM.


It connects to the car's engine's ECM by means of an ATA or J1939 cable television as well as permits professionals to watch a group of diagnostics all at once. It shows present setup of an ECM. The software additionally has an innovative graphical interface as well as separate pull-down food selections. The program permits individuals to see a vehicle's version identification, version, as well as various other crucial info. A brand-new variation of Caterpillar ET software application has just been launched for your shop. CAT ET 2020A changes CAT ET 2019C as well as CAT ET 2018A, which are both previous variations. . It likewise includes a keygen for CAT ET 2020A. To utilize cat et software application, you should have a computer that fulfills a specific minimum arrangement.


 These updated variations of the software will allow your technicians to deal with electronically controlled Cat machines as well as engines. The most recent versions of the software will come with a manufacturing facility password generator constructed in .It is not advised that you purchase a brand-new computer, however it will work well if you have an existing computer system that satisfies the minimum demands. Furthermore, you have to utilize Microsoft Side or another security-sensitive web browser such as Firefox or Chrome. The most current version of these internet browsers may not be validated to work with the solution device. Check out this related post to get more enlightened on the topic:https://www.cnautotool.com/search.php?keywords=Caterpillar+ET3+Adapter+III&imageField=+

 



Please feel free to contact us ,If you have any question:

Live Support: Chat with us online
Whatsapp: +8618437976115
Email:
www.cnautotool.com

Skype:cnautotoolcom
Please bookmark our website so that you can check the order information and contact us.

Volvo VOCOM 88890300 black look vs classic shell

 There are two Volvo VOCOM 88890300 Volvo/Renault/UD/Mack Truck diagnostic tool china clones- one with a Black look hardware clone over internet, the other with the classic metal shell. So any difference of them?

The two VOCOM 88890300 china clones are THE SAME actually.

Porsche Piwis 3 language

The Porsche PIWIS 3 (PST3) is the newest Diagnostic Tool in the market. It can read trouble code, clear trouble code, shows ECU information. It test live data, display actual values, and programs. On all; process malfunction navigation, showing all interior circuit diagram. Specially if  were produced after 2005. The PIWIS III has original oscillometer and multi-meter Function. It is the absolutely necessarily tool for the job.

Porsche Piwis 3 Multi-Language: German, English, US English, French, Italian, Spanish, Japanese, Chinese, Russia, Portuguese, Nederlands

 

1.Piwis 3 With V40.900 Piwis III Software for Porsche Cars diagnostic & Programming.
2.Piwis 3 with developer mode software & TeamViewer Installed Lenovo Laptop Ready To Use, cover all piwis 2 functions.
3.With New DoIP Ethernet diagnostic technology,Supports Porsche Models after 2002

www.cnautotool.com

Distinctive features of the Porsche PIWIS 3

 Porsche Piwis 3 Tester III equipment

 

    Product Name: Porsche Piwis 3 Tester III Diagnostic Tool Programming and Diagnostics Support
    Type: Electrical diagnostic system.
    Voltage: 12V / 24V
    Weight: 1kg
    Connection: USB
    Function: Diagnosis and Programming
    Support vehicles: All Porsche models up to 2021

Top 4 Reason to get Tester III Diagnostic Tool :
1. Exclusive support for P0rsche third generation diagnostic PIWIS 3
2. New DoIP Ethernet diagnostic technology
3. Luxury car diagnosis, ultra low threshold
4. Support Porsche Models after 2002.
Update method : Send SSD back or buy a new SSD

Distinctive features of the Porsche PIWIS 3

    Diagnostic application
    Guided bug finding
    Actual value / input signal function
    Driving test/link function
    Maintenance/repair function group
    Programming/coding function group
    Journaling
    Filter
    Wiring Diagram Application
    Instrumentation interface
    Spending an amount equal to your breakfast for 3 months can own a quality computer for your work for a decade (10 years)

Functions of Porsche PIWIS 3

    Read/clear error codes
    Capture the data stream
    Computer programming match
    Check ingredients
    Refer to maintenance information
    Component site drawings
    Wiring diagram

All Porsche models from 2010 to present (recommended for use with vehicles after 2012): Porsche 911 (997) (991) Boxster / Cayman (987) Cayenne to Cayenne MY 2010 from MY 2011 PanameraEspecially the latest car models: Paramera (971) 2018 Caynenne (92A) 2018 Macan (95B) 2018 911 (991) 2018 and other old cars

    Porsche 911, 992, 991, 997, 996, 996 GT2, 996 GT3, 993, 964
    Porsche Boxster 982, 981, 987, 986
    Porsche Cayman 982, 981, 987
    Porsche Cayenne 9YA, Operation 9YA, 92A, 9PA
    Porsche Panamera 971, 970
    Porsche Racing 935, 991 GT2 RS Clubsport, 982 Cayman GT4
    Clubsport, 981 Cayman GT4 Clubsport
    Other: Macan, Taycan, 981 Spyder, Carrera GT, GT1, 968, 944, 928.

 

Piwis III Supports New & Old Cars:
All Porsche from 1998-2022:
1.Porsche 911(997) (991)
2.Boxster/Cayman (987)
3.Cayenne up to MY 2022
4.Cayenne from MY 2011
5.Panamera

Especially the latest models:
1.Paramera (971) 2022
2.Caynenne (92A) 2022
3.Macan (95B) 2022
4.911 (991) 2022

Also support All Other Old car models

1.Piwis 3 With V40.900 Piwis III Software for Porsche Cars diagnostic & Programming.
2.Piwis 3 with developer mode software & TeamViewer Installed Lenovo Laptop Ready To Use, cover all piwis 2 functions.
3.With New DoIP Ethernet diagnostic technology,Supports Porsche Models after 2002

The Porsche PIWIS 3 (PST3) is the newest Diagnostic Tool in the market. It can read trouble code, clear trouble code, shows ECU information. It test live data, display actual values, and programs. On all; process malfunction navigation, showing all interior circuit diagram. Specially if  were produced after 2005. The PIWIS III has original oscillometer and multi-meter Function. It is the absolutely necessarily tool for the job.

Package Listing :
1× Piws 3 Tester
1× OBDII Cable
1× USB Cable
1× 256GB Software SSD
1× Lenovo S1 yoga12 I5 5300U 8GB

 

 Ultra-low price Porsche Piwis 3 Tester III Diagnostic Software for Porsche :https://www.cnautotool.com/search.php?keywords=Piwis+III&imageField=+

https://www.cnautotool.com/category-2-b0-Car+Diagnostic+Tools.html

Caterpillar ET (Electronic Technician)

  Caterpillar Communication Adapter 3 is a CAT group dealer workshop diagnostic tool built to work with Caterpillar heavy vehicles and Caterpillar engines. This adapter connects any computer (notebook or PC) to CAT vehicle or engine and can perform all diagnostic services by Caterpillar ET (Electronic Technician – Caterpillar Electronic Technician) software.
 
CAT adapter can do diagnostic operations for all Caterpillar vehicle and engine models with electronic controls.
 
Communication:
 
Allows communication between service tools and engine controls using various data links such as J1939/11, DeviceNet (future release), CAT DataLink, and J1708 (ATA) vehicle networks;
Flash program allows adapter firmware upgrades as additional features become available;
Uses J1939/11, high-speed data link (part of ADEM III controls), substantially reducing flash times;
Automatically selects J1939/11 when flashing the engine (reduces the flash time approximately 80%, from 14 minutes to 3 minutes).

With the CAT Diagnostic Tool, you can:
View active and logged diagnostics
View events where irregularities occurred and were logged by the ECM
View the status of a group of parameters (temperatures, pressures, etc.) simultaneously
Record and log performance data
Graph a group of status parameters
View the current configuration of an ECM
Change ECM configurations
Perform diagnostic tests
Perform calibrations
Print reports and diagnostic results
For some machine and engine products, additional functionality has been included with the service tool program


To get the vehicle information the Cat ET software must be connected to the Electronic Control Module (ECM). For this purpose, you need a suitable diagnostic link adapter (DLA), for instance, Genuine CAT Comm Adapter III

The list of supported CAT machines and engines can be found below(if your vehicle is missing, please contact us we will double check):
Engines:
Electric Power
Electric Power Generation
Industrial
Marine Power Systems
Oil and Gas

Machines:
Articulated Trucks
Asphalt Pavers
Backhoe Loaders
Cold Planers
Compactors
Dozers
Drills
Excavators
Feller Bunchers
Forest Machines
Forwarders
Harvesters
Hydraulic Mining Shovels
Knuckleboom Loaders
Material Handlers
Motor Graders
Off-Highway Trucks
Pipelayers
Road Reclaimers
Site Prep Tractors
Skid Steer and Compact Track Loaders
Skidders
Telehandlers
Track Loaders
Underground - Hard Rock
Underground - Longwall
Underground - Room and Pillar
Utility Vehicles
Wheel Dozers
Wheel Excavators
Wheel Loaders
Wheel Tractor-Scrapers

 

 

 

 

www.cnautotool.com

 

 

How to do when you open the GM MDI 2 Manager

 

 

Some customers will have the problem when they used the GM MDI 2, it says the the MDI can’t find or can’t connect the MDI.

Now let me tell you that the question is they open the Manager and GDS2/Tech2Win together.

When you used the GM MDI 2 appear this. What you should do?

 

 

 

When you open the Manager, you will find that you can’t diagnostic the car, it inform you that can’t fine the MDI.

You should click the “Disconnect” first, then you close it.
You will find you can use the GDS2/Tech2Win to do the cars.

The most important thing of GM MDI 2 is you can’t open the Manager.

If you have any question, please contact me.

https://www.cnautotool.com/category-44-b0-Professional+Diagnostic+Tools.html

How to Fixe Benz C5 doesn’t appear “license.dat” after copying key

  How to Fixe Benz C5 doesn’t appear “license.dat” after copying key

Purchase MB sd connect C5 with Xentry.OpenShell.XDOS 2019.12. The installation is smooth except when I copied the key from “GetHardware ID” and then paste it into “New Text File”, I got no file “license.dat”. Can you help me through ” TeamViewer”?

www.cnautotool.com engineer solution:
The video demo simplifies the procedure, please send the ID to us, our engineer will send you “license.dat” file, then you can active by yourself.

Images mean a lot:
Note: the Xentry software version in the images are old, but the activation method is the same.
1
. Create one new text file, name it as “Key”.

 

2. Open “GetHardware ID”.

3. Copy the “GetHardware ID” and paste it into the text file “Key”, then send the file to the dealer obd2shop.co.uk, wait for the “license.dat”.

4. Click on “License” active the Xentry software.

5. Active successfully.

 

The job is done.

The original Porsche PIWIS 3 For Porsche Car

 

 

Porsche Piwis III is the newest Porsche Diagnostic Tool in the market. PIWIS III PST3 can replace Porsche Piwis tester II completely. PIWIS III compare with Piwis II, support Porsche new model after 2018. Most client request for Piwis 3 recently.


Porsche PIWIS 3 (PST3) main features :
1.Piwis 3 With V40.400Piwis III Software for Porsch Cars diagnostic & Programming.
2.Piwis 3 with developer mode software & TeamViewer Installed Lenovo T450 Laptop Ready To Use, cover all piwis 2 functions.
3.With New DoIP Ethernet diagnostic technology,Supports Porsche Models after 2002.

Package Listing :
1× Piws3 Tester
1× USB Cable
1×  Software
1× Lenovo T450 Laptop (Second Hand)

Client will get original Porsche PIWIS 3 Tester III Diagnostic Tool PT3G V40.400&V38.300 with Lenovo T450 I5 8G Laptop to use from obd2tool.com. Piwis Tester III support regular software updates, Piwis III full set come with developer mode option for additional functionality, which support navigation map conversion, unlimited license.

PIWIS TESTER III VEHICLE COVERAGE UP TO 2018:
1. 911
2. Cayenne
3. Macan
4. Boxster/Cayman
5. Panamera

Piwis III Porsche PST3 can read trouble code, clear trouble code, shows ECU information. It test live data, display actual values, and programs. On all; process malfunction navigation, showing all interior circuit diagram. Especially if Porsche were produced after 2005. The PIWIS III has original oscillometer and multi-meter Function.

Porsche PIWIS 3 Tester III Diagnostic Tool PT3G V40.400&V38.300 with Lenovo T450 I5 8G Laptop, Piwis III ‘s latest Porsche scanner is only one PIWIS Tester work for Porsche Car after 2017.Piwis III replace Porsche Piwis2 for Porsche new models

www.cnautotool.com

Xtool X100 PAD3 X100 PAD3 SE Software Function

XTOOL X100 PAD3 Auto Key Programmer Support All Key Lost Odometer Adjustment OBD2 Car Diagnostic Tool

XTOOL X100 PAD3 Functions:
* Key programming
* Oil Reset/Engine oil light reset
* Odometer Adjustment
* Tire Pressure Warning Light Reset (Manual Operation)
* Timing belt light reset (Manual Operation)
* EPB Electrical Parking Brake Adaptation
* TPS Throttle Body Adaptation
* Steering Angle Calibration
* Battery Reset
* PIN Code Reading
* Hexadcimal editor(Win Hex)
* OBDII Diagnosis
* INJ Code
* Support the latest vehicles with CAN BUS and UDS protocol
* Update Via WIFI (always equip your device with the latest software)
*More….

Xtool X100 PAD3 X100 PAD3 SE Software Function Display

1.The following is the page after activing the device



2.Reset Service Display

3.Common Diagnosis

4.IMMO Vehicle List Display




5.Report

6.Settins

7. About Device

8.BackUp&Reset

9.About Storage


www.cnautotool.com

enjoy