MB SD Connect Compact C4 Star Diagnosis

MB SD Connect C4 package shows:
MB SD C4 Multiplexer
OBDII 16PIN Cable
38PIN Cable
14PIN Cable
8PIN Cable
Lan Cable
SD C4 2014.03 HDD



MB SD Connect Compact C4 supports reading out & erasing trouble code, reading the real-time data of sensor and actuator, coding and programming with WIFI.


MB SD Connect C4 functions:

1.1989~up to now Car, Bus, Truck, Sprint, Smart ,
2.All electric system Diagnostic,(Do not include flash code)
3.reading trouble code
4.erasing trouble code
5.live-data
6.adaptation
7.component testing
8.maintenance
9.information consultation
10.component location diagram
11.wiring diagram

New version mb sd connect c4 new features:

1. Compeletely new HDD with 320G compacity.
2. Newest software version: V2018.03
3. Update some Benz System data like:
205/231/414/230/169/453/215/222/164/639/246/461/124/163/207/242/447/211/129/454/203/204/172/251/170/452/219/166/221/638/202/
220/240/212/197/415/245/208/450/463/117/216/176/210/451/209/218/463/636/171/168/199:Xentry
4. Fix bugs.

Firmware version: V2.2.2

(This is the best quality one on the market, it can support hardware update)

MB SD Connect C4 firmware function:

1. New MB SD Connect Compact 4 Star Diagnosis not only support K line diagnose and CAN BUS,but also UDS diagnose protocol. Because old MB STAR C4 main board do not have UDS chip, so old MB STAR C4 can not support it,
2. New MB SD Connect Compact 4 Star Diagnosis support wireless diagnose,
3. Multiplexer now use Lan cable to connect, can not use on IBM T30 laptop.
4. Connector adopt Military quick swap technology, it can support 10,000 times pull plug, more stable,
5. All core accosseries adopt original new packing chip, and 24 hours test, guarantee the quality of the products.

Mercedes Scan Tool MB SD Connect C4 Software Language:
English,Croatian,Czech,Danish,Dutch,Finish,French,German,Greek, Hungarian,Italian,Japanese,Korean,Polish,Portuguese,Romanian,Russian,Spanish,Swedish,Turkish,Chinese.

Software Selection:

1. DELL D630 laptop: 2018.03 D630 HDD
2. External Hard Disk 2018.03

Suggestions for Ford Mazda VCM 2 VCM II ?

For the time being, VCM 2 VCM II IDS was the well-known OBD2 Diagnostic Tools  for both ford and mazda car models. Ford VCM 2 has launched the marketplace for ages,tested by many ford mazda car owners and was regarded as the most stable obd2 diagnostic tool for ford mazda cars.


See the confirmed and official features about Ford Mazda VCM II IDS below

1.Used famous famous IDS Software to provide full dealer diagnostic capabilities for most 16 pin cars 1996-2015, including for all new 2013 vehicles.
2. for Ford and Mazda 2 in 1 Diagnostic
3.Support VMM and CFR.
4.Multi-functions supported,can do diagnose, scan, airbag, key programming, ecu programming, PCM programming via OBD2 port.
5.Multi-lanugages available.
6.tested by many users,easy and stable to use.

Well,just as every coins have two sides, the Ford VCM 2 VCM II IDS also has its own limitation like below

1. It is china version,not original one,but the quality and performance have been tested and confirmed by users.
2.Supports For Ford IDS V101,Mazda IDS V94.
3.Only For Ford cars,not for Ford Trucks.
4.Please make sure the working voltage is 14V and stable when you use the Ford VCM 2 Scanner do programming.

General Speaking, the  merits of VCM2 was over than dismerits of VCM II VCM 2 IDS,so,personally thought that the Ford Mazda VCM II will worthy to buy,this tool has been tested by many users,stable and easy to use and the price is affordable too.

MB SD Connect Compact 4 Star Diagnosis WIFI Setting Manual

We know The MB SD Connect Compact  can connecting with Both Lan cable and WIFI, some customers might have question and problem about how to setting WIFI. Autonumen.com share with you about WIFI setting on SD Connect C4
How to Setting MB Star Diagnostic Tools MB SD Connect Compact 4 Star Diagnosis WIFI ？
Steps by steps instruction:
Click wireless network icon to select “View Available Wireless Network”.

Click “Refresh network list”.

Click “Change advanced settings”.

Select Wireless Network.
Tick on “Use Windows to configure my wireless network setting”.
Click Add.

Enter Network name..
Tick on “Connection even if this network is not broadcasting”
Cancel tick on “The key is provided for me automatically”.
Tick on “This is a computer-to-computer (ad hoc) network; wireless access points are not used”
Enter network key and confirm it. (network key: 26 a)

Go to Connection and tick on “correct when this internet is in range”, then click OK.



Enter the network key and click Connect.
Click the red circle in the menu bar.
Select Configuration and then click Yes.


Select MUX>> Register/Configure.

Select Encryption: WEP/Hex and enter the key (26 “a”s), then click Start.

Click OK.

Close Administration interface.
And you will see the network set just now is connected.

That’s all finished
If you have a MB SD Connect Compact 4 wanna setting wifi or do not know how to setting WIFI, please can following with this instructions, hope it would help you.
If you wanna USE SOFTWARE DIRECTLY , we recommend you buy the SD C4 plus DELL D630 Laptop package.

Solution about MB STAR C4, MB STAR C5 Update and can not test vehicles problems

Make sure your computer hardware version is higher the mb star c4 or mb star c5 version, otherwise, CSD will show update failed . Bootimage can update successfully. The following picture show how to check the mb star c4 or mb star c5 version

The following picture is show your computer hardware HDD software version

If their software is not same, it no need update ( because factory has upgraded the latest version of the mb star c4 or mb star c5 machine)
If customer not use our HDD software, it will appear read vehicle failed problems.
Solution as following
(1) Mb star c4 or mb star c5 supply power to confirm the machine was turn on, like the following picture ( If now show the three icon, it means the mb star c4 or c5 main unit is broken）

(2). connect LAN with computer, confirm computer IP change to172.29.127.118, like the following picture :

(3) change of software using pattern (Because you modify the software for the firmware upgrade mode, the software is not test the vehicles)The following picture is show the software is upgrade mode

The following picture is show test read vehicle mode.

Three files name Update_automaticx , Update_manualx ; Update_SpecialxThis is read vehicle mode, if can not read vehicle, please change files name, then restart computer

How to Change MB Star DAS Xentry Start Picture

It’s a customer interesting setup on changing a picture of MB Star Diagnosis DAS XENTRY software interface. Here is what he shared for all:

I was playing around with DAS the other day, changing things when i came across a picture of Xentry

So i decided to change it and it worked…

I think you guys can change it so that it displays your shop logo every time you start DAS or picture that you like.

It takes couple of tries but once perfected it can be used on other systems as well

When you change it, just make sure it’s confined to standards such as

Code:

File must be in location C:\Program Files\Mercedes-Benz\DAS\bin

File name must be “XentryDAS 991×620.bmp”

File must be in “bmp” format or Bitmap image (.bmp)

Width must be 991

Height must be 620


The original Xentry DAS interface picture:

MB Star xentry das start picture after change: